Status LED Activity Description

The AP305C/CX have a rectangular status light on the top right corner of the chassis. The status light conveys operational states for system power, firmware updates, Ethernet and wireless interface activity, and major alarms.

Table 1. IQ Engine Status LED Activity

Status	Activity
Dark	Power is off
Solid white	The device power is on and the access point is ready to use. The device has successfully established a Control And Provisioning of Wireless Access Points (CAPWAP) connection to ExtremeCloud IQ and is operating normally
Slow-blinking white	The device has a CAPWAP connection to ExtremeCloud IQ, but is operating on 802.3at power instead of 802.3at power
Solid amber	The device power is on and the access point is in boot up mode, or is running without a CAPWAP connection
Slow-blinking amber	The device has no CAPWAP connection to ExtremeCloud IQ, and is operating on 802.3at power instead of 802.3at power
Fast-blinking amber	The device is updating its IQ Engine firmware

Table 2. ExtremeWireless WiNG Status LED Activity

Status	Activity
Dark	Power is off or Access point is taken over by the controller. Configuration pushes down to access point from controller to turn off the LED completely
Solid white	The device is booting or already taken over by the controller
Slow-blinking white	The device is in the process of being taken over by the controller or has failed to be taken over by the controller
Flashing fading white	Configuration pushes down to access point from controller helping an user to locate the access point location using visual inspection
Solid amber	The access point is upgrading its firmware
Fast-blinking amber	The access point is acquiring DHCP IP